How to Sew a Dog Bed for a Crate

Posted on
Follow Me on PinterestPin It

When Rusty has to go into his crate all he does is sleep. I decided to make him a bed for his kennel so he is a little more comfortable while I am away. First I gathered supplies. You’ll see that I actually bought a dog bed foam kit. I did this because I had a coupon and that made it cheaper to buy the kit than it was to get the 1.5inch foam cut to my specifications since a coupon wasn’t available for the foam you get by the yard. Then bed is an oval which is why in later pictures you’ll see that the bed has rounded corners and doesn’t extend to the corners of the kennel. Also, I put a zipper on the bed so I can wash the fabric.

Bed Supplies

  • fabric
  • sewing machine
  • ruler and measuring tape
  • scissors
  • thread to match
  • marking chalk/pencil
  • pins
  • foam
  • kennel
  • long center zipper for end of bed

First thing I did was measure the kennel floor. Then I went and bought the foam and fabric to fit the bed, so I added a few inches in length to cover all sides of the bed.Then I remeasured the kennel floor and cut the foam to fit it.

bed

measure kennel

Next I placed the fabric down, put the foam on the fabric and folded the fabric over the foam, connecting the right side edges of the fabric. I could measure, draw and cut, but this way seemed easier to me. I did make a faint line on the fabric around the edges where I wanted to cut giving myself and extra inch to sew the seam.

measure the fabric

Then I cut the fabric.

sew

Cut and Sew

Next I remove the foam, pin the fabric together, get out my machine, and sew a 5/8 inch seam along two sides of the bed. The long side is a fold in the fabric and the other shorter side is where I’ll sew a zipper.

Next I get my long center zipper out, I think it was 22 inches.  I pin it to the right side of the fabric.

zipper

Pin and Sew zipper

I change to a zipper foot on my machine and sew it in.

zipper

Zipper

Then I place the foam in the giant pillow/bed case, zip it closed, and it’s ready to go into the kennel giving Rusty a comfy bed to sleep on while I’m away.

bed

Trying out his bed

I think he likes it!


2 thoughts on “How to Sew a Dog Bed for a Crate

    • Hi Cyndy! Thanks for your question. I actually got the kit from Hobby Lobby a few years ago near the fabric section. I am not sure if they still carry it. If they don’t, if I remember correctly, JoAnn’s sells foam of varying thickness by the foot which could work. Molly Mutt, http://www.mollymutt.com/diy-kits.html , sells kits.

Leave a Reply

Your email address will not be published. Required fields are marked *