altered men's suit jacket

Altered Men’s Suit Jacket

Posted on
Follow Me on PinterestPin It

My husband bought a $30 suit jacket from Target that was too big for him, mainly in the waist. We decided it would be a good project for me to work on since I’ve never done any tailoring or altering of men’s clothing except for the hem of pants. So I attempted at creating a great altered men’s suit jacket.

1. First thing I did was have him put it on and I pinched the fabric to fit and then pinned it. Then I unpinned it because I got his undershirt :/ and re-pinned it.

2. Then I marked the place where the pins went into and out of the fabric just in case a pin fell out with a chalk pencil. I did this on the lining of the jacket as well.

men's altered suit jacket

pinch and pin

3. I measured in between the dots and marked the measurements on the jacket, with a fabric chalk pencil, and on a piece of paper. These measurements are what I needed to take the jacket in by. I did this on the lining of the jacket as well.

men's altered suit jacket

my measurements

4. I then got out my handy seam ripper and separated the lining from the back of the jacket. I just did the bottom of the jacket and up the closest seam line on the side of the jacket.

altered men's suit jacket

lining pulled back

5. With the lining up and out of the way, I ironed the seam so it was no longer open. Then from the seam I measured and marked half the distance that I wrote down and because the measurements were slightly different in some locations I did this at each site of where a pin was and connected the dots. This starts with no measurements at the top because the shoulders fit so the line in a diagonal down the back of the jacket increasing as it goes to the bottom because the waist of the jacket is what was too big. I pinned the layers together and sewed down the chalk line, cut off the extra fabric and ironed the seam open. The first time I did this, I had a notch of extra fabric at the collar and had to redo it. 

men's altered suit jacket

mark and sew

6. Repeat step 5 for the lining.

The last couple of steps is figuring out the tail and reattaching the lining to the jacket.

7. For the matching the lining to the tail I just kept folding and pinning until I had what I thought looked acceptable.

altered men's suit jacket

all sewn up

8. To reattach the lining to the jacket, I am sure there is a machine stitch way, like a blind hem stitch possibly, but I decided to hand stitch it with a slip stitch, I own a book called Teach Yourself Visually Sewing and does a great job illustrating how to do it. The stitch mimicked the rest of the lining to the jacket pretty well which is another reason why I picked it. I then ironed the lining and now the jacket is a great fit!

altered men's suit jacket

finished!