yoga pants

Shortened Yoga Pants

Posted on
Follow Me on PinterestPin It

yoga pants

This always happens when I buy new pants. They’re too long and these new yoga pants are no exception. I was a little worried about altering them because my experience with stretch fabric is next to zero. There was that one time when I used lycra for Rusty’s lions mane. But these pants needed to be about three inches shorter if I was ever going to get any use out of them. And let’s face it, when I say use, I mean lounging around my apartment, not working out in a yoga studio.

yoga pantsI folded and pinned the pants so they were the proper length while they were still on me. I changed and then measured the in-seam and the folded part to make sure that the lengths of each pant leg were even. Also, to see how much length, 3 inches, needed to be taken from each leg.

Next, I removed the pins and turned the pants inside out. I then carefully measured and cut 2 inches from each pant leg.

yoga pants

I then folded over ½ inch of fabric and pressed and then another ½ inch and pressed. Then I pinned the folds into place.

yoga pants

Rusty was not impressed by my cutting and ironing skills. I gave him a stretchy collar but he was even less impressed with that.

yoga pantsI placed my pins so they could be quickly and easily removed as I was sewing. I realized that although my machine can use a double needle, I don’t have two spools of thread in the same color. So that option was thrown out and instead I used a stretch stitch function my machine, a triple zig-zag stitch. I definitely had to pull out my user’s manual to make sure I was doing it correctly, very glad I kept it.

yoga pants

I stitched both legs using the edge of the folded fabric as my seam guide. I then pressed the seams.

yoga pants

I have crazy flip-flop tan lines on my feet. :/

I turned the pants right side out, put them on, and enjoyed my shortened yoga pants by watching TV and cuddling with Rusty.


hem shorts

How to Hem Shorts and Pants

Posted on
Follow Me on PinterestPin It

My husband needed his shorts hemmed. They were about an inch too long and it’s almost summer, well it’s May we just aren’t having summer weather yet, his shorts needed to be completed. The measuring and pressing part of hemming them is the most important part of this process. It is with most but usually I don’t pay too close attention but with it I needed to be precise.

Step 1. I needed to figure out what the desired length was and then turn the shorts right side in.

hem shorts

Step 2. Seam rip the bottom of both legs

Step 3. Press the bottom of the shorts and measure and mark desired length.

Step 4. Measure about an inch and a half below your desired finished length and cut off excess fabric.

Step 5. Fold over about 1/4 of an inch and press

hem shorts

Step 6. Fold over about 1.5 inches and press

shorts, pants, hem, shorten

Step 7. Sew your new seam as close to the edge as possible, I moved my needle over to the left and used the foot edge as my guide.

Step 8. Press again, flip right side out and press again.

Step 9. Repeat for the other leg.

hem shorts

inside finished seam

hem shorts

ready to wear close up

hem shorts

ready to wear