shorten a shirt dress

How to Shorten a Shirt Dress

Posted on
Follow Me on PinterestPin It

dress

I recently bought a shirt dress to wear with boots as a fun fall work outfit but of course it is too long, about 2 inches too long. I knew I needed to shorten my shirt dress. This was going to be tricky for me because of the curves at the bottom. I usually only work with straight lines because my lack of patience usually gets the better of me when trying to work on a curve. But after a long afternoon with Rusty whining behind me from lack of attention I managed to get it to my desired length.

Here’s what I did:

Stood in front of a mirror and figured out how much fabric needed to be taken off the bottom. I pinned the length and then stood up straight to make sure that was my desired length.

shorten a shirt dress

chalk marks

Next I unbuttoned the shirt and laid it out, right side down, and with my chalk pencil, I marked a lot of spots up to the desired length of the dress. Then,  I also marked about an inch below that to serve as a cutting line.

shorten a shirt dress

two rows of chalk

It’s now time for my most time-consuming part, the hem! I needed to clip a couple of spots on the curves in order for the fabric to lay flat. Little by little I rolled over a ¼inch of fabric and then another ¼inch of fabric and pinned. I made sure to put the pins in to where I could sew with them still in the fabric so I’d have one less thing to worry about. And after all of that work, carefully, put the dress back on to make sure it is at the desired length.

http://www.covergirl.com/collections/nfl-collection/chicago-bears

lots of pins

Sew time! Slow and steady with some patience, wins the race because it is a tiny hem and there are curves, it’s best to go slow.

Try on one last time. Good? Press. Now I have a dress that will be perfect with flat and boots this Fall!

shorten a shirt dress


fingerless gloves

Simple Knit Men’s Fingerless Gloves Pattern

Posted on
Follow Me on PinterestPin It

Homemade presents are the best presents in my opinion because you know the person really thought about the gift and put some time into it. Also, I enjoy making gifts for people too so it’s a win win.

I needed to get a gift for a friend and decided on fingerless gloves. I have a pair and love them.  I have also decided to make a pair of fingerless gloves for my dad because he uses a cane and these will allow him to keep his hands warm and still have the ability to grip the cane. For my friend’s gloves, I decided on a 100% baby alpaca chunky yarn in gray because it’s so soft and warm. It’s also just my favorite yarn to knit and gray goes with everything.

easy pattern/ how I did it:

  1. cast on 32
  2. k2 p2
  3. continue pattern until it reaches desired length  I made mine about 8 inches because I wanted the glove to go all the way under the coat sleeve so no skin was exposed
  4. cast off in the k2 p2 pattern
  5. fold in half lengthwise and whip stitch up the side leaving an opening for your thumb about an inch down from the top

Then you have great fingerless gloves for the late fall and winter!

This pattern can easily be adjusted for men and women. Just reduce or increase the stitches by the pattern of 4 stitches (k2p2)

fingerless gloves

action shot


background complete

Paw Print, How to Cross Stitch

Posted on
Follow Me on PinterestPin It

After I drew my paw print pattern I got to stitching! Here’s how to cross stitch. First I’ll go a little backwards with photos of doing the cross stitch with a border I’m putting around it. But a starting note, remember, is that there is no knot at the end of the thread, you simply leave about an inch on the back side of the fabric.

step 1

take the needle through to the front side of the canvas from the bottom hole

step 2

pull through and go to the next row over, up and to the right diagonally, pull needle all the way through to the back of the canvas

step 3

next go to the hole directly underneath the hole in the previous step and pull the needle through to the right side of the fabric

step 4

after you’ve done another diagonal stitch, go to the hole underneath the one previously used and pull needle through to the right side of the fabric

step 5

now go up and diagonal to the left

step 5

now go up and diagonal to the left

step 6

the first X is complete and now repeat

step 7

go diagonal again to complete the second X

In my pattern I have a lot of half squares which could be confusing. But really it either means a half of stitch, literally a half of a stitch where the needle goes through the center of the square making the diagonal half of it’s usual length.

with green

Pattern Complete

This is the pattern complete! But I needed a way to finish it, make it actually look complete. So I decided to make a border around it.

green

It still quite wasn’t what I hoped so I added another border.

red and green

almost complete

That looks much better to me, so now I’m going to fill it in with a cream colored thread to leave no square unstitched.

background complete

background is filled in

To finish the stitching part of this I decided to backstitch around the paw print to highlight it. This is easier, I think, than back stitching in sewing because it has the holes to put your needles in to make your stitches the same length and it is often used as a finishing stitch in cross stitch.

Stitching is Finished!

I put a pencil next to it to give a size reference. Now I need to figure out how to turn this into an ornament.


More Cross Stitch Patterns

Posted on
Follow Me on PinterestPin It

I’ve drawn more cross stitch patterns! I’ve gotten the pattern making bug! But thank goodness for pencils and erasers because I used them a lot! 🙂

I made more patterns because I made Rusty a cross stitch pattern, which will be turned into an ornament that I decided my husband and I needed one too. Granted they are very basic, beginner cross stitch patterns, but they are my first group of patterns I’ve ever drawn. I can’t really draw that well to begin with but I wanted to try.

I have decided not to do a color legend for these because I wanted to keep my options open, as in, I wanted to make sure I had enough thread in my thread mess ball.

needle cross stitch pattern

my pattern

I couldn’t decide what to make for Joshua, my husband, so I sketched a couple of his hobbies and let him choose which one I made.

running shoe cross stitch pattern

running shoe

climber cross stitch pattern

mountain climber

snowboard and goggles cross stitch pattern

snowboard and goggles

He picked the mountain climber so now I have two more ornaments to stitch and make into ornaments! Still deciding on whether or not to backstitch the year onto it.

Graph paper really is a girls best friend when trying to draw cross stitch patterns.


How to Cross Stitch

Posted on
Follow Me on PinterestPin It

I feel like the holiday season is a popular cross stitch theme. Mainly because I have cross stitched and finished three cross stitch stockings. So I thought I’d show how to cross stitch.

To start with new thread, there is no knot at the end of the thread, you simply leave about an inch on the back side of the fabric and your stitches will make it tight.

Here’s the basic cross pattern, thank goodness for graph paper:

the . are where the needle goes through the needlework fabric

the solid lines represent thread.

step 1 how to cross stitchstep 2 how to cross stitchstep 3 how to cross stitchstep 4 how to cross stitchstep 5step 6step 7

Drew the same row of Xs underneath because it was getting crowded on the top row with all of the numbersstep 8step 9 and 10cross complete You are literally making an X with your thread. Going left to right, when all of the / are done in that row you go right to left with a stitch that looks like this \  completing the X in cross stitch.

To end make sure your needle is on the back, wrong side, or your canvas and pull needle under a couple stitches to secure the thread in place.

 


from the front

How to Make a Knit HeadBand

Posted on
Follow Me on PinterestPin It

I’m going to the Harvard vs. Yale football game this Saturday and realized I don’t have a lot of Crimson to support Harvard. I have plenty of orange and navy to support the Fighting Illini and Da Bears but not much else. I decided on a knit headband.

So I took the extra maroon yarn from my felted knit bag and counting the slip knot, cast on 7.

yarn

tiny yarn ball

I went until I had little yarn left and finished it. It ended up being 11 3/4 inches long.

all knitted up

supplies

Then I got one yard of black ribbon a little bit smaller in width than the knitted piece, cut it in half and hand sewed it to the knitted piece. I used a running stitch  along the top, bottom and down the middle of the ribbon. I tried to make sure not to go over the knit stitches so the black stitches wouldn’t be seen. I also put the ribbon about four inches onto the knit piece to give the head band some strength.

The ends of the ribbon will fray so it’s best to fold over the end, to create a hem and sew to enclose the end of the ribbon.

front view

back view

I tried my best to get a good shot of me wearing it but apparently I am no good at it, and every straight on view, I looked a little cooky so maybe I’ll get some good pictures at the game!

from the front

Now I have a nice unique headband to wear to the game and just a fun winter accessory!

  1. wool yarn, cast on 7 on size 6 needles
  2. knit stitch until about 12 inches long
  3. 2 pieces of 1/2 yard ribbon
  4. sew ribbon to knitted piece
  5. wear and look great!

 

 


all three

Knitting Washcloths

Posted on
Follow Me on PinterestPin It

My next project was knitting washcloths using different stitches. It requires all cotton yarn, because you need to be able to use and wash them regularly.

wash clothes

yarn for wash clothes

The first one, a plain knit stitch wash cloth, I have cast on multiple times. I find 100% cotton yarn to be much more difficult to work with than wool and alpaca. Maybe because it’s a stiffer material.  Also, I found the pattern in the book for the first washcloth, which is to cast on and do a knit stitch which creates a garter stitch, to be quite large for a wash cloth. So I cast on only 35 stitches. But, I found that 35 was a bit smaller than my other wash clothes but not so small that I couldn’t use it. But cotton is not my favorite. I can see why the book suggests to do just a knit stitch for the first cloth. I was having a lot of problems with it.

problem

issues

I probably cast on five different times until it looked close to normal and once I got to knitting, I found it different to keep the end of each row as tight as the other stitches. But this is the finished result. I think it looks nice.

knit stitch

knit stitch

Next one is using a purl stitch. This was my first project with it. The cloth has a knit stitch border.

-knit stitch a few rows for the top border

-knit stitch a few stitches to continue border, I used 5 stitches,

-purl stitch the row until the last 5 stitches, knit stitch those

-knit

-repeat until last few rows

-knit last few rows for bottom border

-bind off

purl

purl stitch with a knit stitch border

I obviously had a couple of issues, but that’s what happens when you’re watching the newest episode of Revenge, thank God for Hulu Plus :), and not paying enough attention to your needles, so from now, after I complete a few rows I’ll always check to see if there is anything I should fix.

Next was the basket weave washcloth! Probably my favorite, pattern wise and the colors in the yarn. This is what I did:

-cast on 50

-knit 5, purl 5, continue pattern

do this for 5 rows

-purl 5, knit 5, continue pattern

do this for 5 rows

-continue to alternate until desired length is reached.

-bind off

I just did it until I ran out of yarn. I used my row counter for this just incase I forgot what stitch to start with and even wrote out, row 1-5 start with knit, 6-10 purl, 11-15 knit, 16-20 purl, and so on to keep me on track.

weave

basket weave

As much as I do not enjoy cotton yarn, I know I’ll use it again if I redecorate and I make wash clothes and other kitchen items.

all three

completed wash clothes

So now I have three wash clothes to use in my kitchen 🙂 Maybe I’ll enjoy cleaning more knowing I created/made the wash clothes I’m using? Hopefully?

 


How to Sew in a Zipper

Posted on
Follow Me on PinterestPin It

Yesterday I showed how to create a bed for a dog kennel. Today I’ll show you how to sew in a zipper. I cut some pieces of fabric and drew on them to better show how to sew the central zipper in.

-To start, mark where the zipper will go because before and after the zipper a seam stitch will be sewn and where the zipper will go, I’ll do a basting stitch, or the longest stitch on my machine.

-Use pins or fabric chalk to mark the fabric. Don’t use a marker like I did, I just wanted to clearly show where to mark.

mark

mark fabric

baste

where to baste

– Pin the fabric together and baste where the zipper goes and continue with the seam stitch before and after the zipper, backstitching when I stitch the stitch length, I’m using a 5/8inch seam.

both stitches

differences in stitches

-Then iron the seam open.

iron seam

iron seam

– Then pin the zipper, face down, teeth to the seam. I placed the pins in the wrong direction. So I had to switch them so I could easily remove them as I was stitching.

zipper

pin zipper over seam

– Using a basting stitch, longest stitch on my machine, I place the edge of my zipper foot directly in the middle of the teeth and stitch, when I need to turn, I leave the needle in the fabric, lift the foot, and turn the fabric to the direction, put the foot down and begin to stitch again. I use a basting stitch to tack the zipper to the fabric and I don’t have to worry about removing pins as I sew.

– When I get to the zipper head, I make sure the needle is in the fabric, lift the zipper foot and push the zipper head past the foot.

zipper foot

zipper foot up, and push the zipper head past the foot

– Once the zipper head is out of the way, put the foot down, and continue stitching.

down

zipper foot down and continue stitching

-After the basting, stitch around the zipper with a smaller stitch size, just outside the basting stitch. Using the same technique at the corners and the zipper head.

-Once the stitching is complete, remove the basting stitch around the zipper and in the middle of the zipper.

basting

remove basting stitch

– The zipper is complete! The zipper has been successfully installed. It does take practice but it’s not as intimidating as it first appears.

zipper

zipper complete

zipper

finished

Happy Sewing!


How to Knit the Purl Stitch

Posted on
Follow Me on PinterestPin It

Purl stitch day!

We know how to do the standard knit stitch, so it’s time to switch it up a bit, well literally switch it up with the purl stitch. The purl is the opposite of the knit stitch.

With the knit stitch, the yarn starts in the back, but for the purl stitch the thread starts in the front.

purl stitch

start with the thread in front

Next take the right hand needle through the first stitch on the left hand needle, going from the back of the needle to the front of the needle.

step 1

back to front

step 1

another view

Then take the yarn over the right hand needle.

step 2

wrap yarn around needle

Like with the knit stitch, pull the right hand needle out catching the yarn.

step 3

catch yarn while pulling right hand needle out

step4

catch

Then push the stitch off of the left needle and pull the yarn a bit to keep the stitch tension consistent.

push off

push stitch off

There’s the purl stitch! Now I can create more patterns with knitting.

 


How to Sew the Whip Stitch

Posted on
Follow Me on PinterestPin It

Here is my awesome drawing again! 🙂 Alright yesterday was the running stitch, and today I’ll be going over the whip stitch. It is a very versatile stitch and it is just a loop stitch. I have used it to repair holes in fabric that are not on the seam, to edge a button hole to give it strength, to combine different fabrics for sewing and knitting, and I’ve used to to combine my plastic canvas pieces for the doll workout equipment.

Reminders:

– On my fabric you’ll see a R and W written on it, this is for Right side of the fabric or the side everyone sees when the project is finished and Wrong side of fabric or the underneath part people don’t see.

– Another side note, I found out the hard way that this wasn’t the greatest fabric to do my tutorial with, it breaks and pills very easily. It’s an old pillowcase.

– For all hand stitches, use two of string only about forearm length so you aren’t tangling or doing extra unnecessary movements. Also, tie a knot at the end of the thread, sometimes more than one knot in the same place is needed so the knot doesn’t go through the fabric.

I’ll show two different types of whip stitches today, first one will be to close a rip in fabric that is not near a seam. It’s a little messy, so try to find thread that best matches the fabric.

whip stitch

repairing a rip

Start on the wrong side of the fabric just below the beginning of the rip.

whip stitch

start on wrong side of fabric

Go over the rip to the top of it.

whip stitch

go over rip

circle

looping it around, wrong side of the fabric

I’m creating a circle with the thread and come through the right side of the fabric below the rip again.

whip stitch

whip stitch

Go to the top over the rip

whip

Closing the rip

The whip stitch is used to close the rip and to prevent it from getting bigger.

whip

front view

whip

back view

This is a little bit of a messy stitch job, but my point is made. You want to get your stitches as close to each other as possible to create a lot of strength and try to keep the stitches even. When the stitching is complete tie a double knot in the thread like I did for the running stitch.

Whip Stitch number two: button hole

whip button

hole for whip stitch number two

After I tie the knot I go through the wrong side so the needle comes out on the right side.

EDGE

Loop around the edge

whip

Creating a loop or circle around the hole

For this whip stitch, I only bring the needle from the wrong side to the right side because I am edging or finishing around the hole. So I am just making a circle with my thread enclosing the edges with thread.

whip

front view

stitch

back

Once you have gone all around the hole, tie a knot.

button

same whip stitch from Rusty’s Lion Mane Costume

 

all stitches

All Stitches Front View

All Stiches Back View

It’s a great idea to practice these stitches before using them on a project. Also, it might be helpful to have a swatch of fabric like the one above with the labeled stitches. It is a good reminder of how to do the stitches. I like to have one anyways.