We have a Christmas tree at work and it was looking bare to me because it didn’t have a tree skirt. So, I decided to make one. Here is my very professional pattern that I drew at work.

my make shift pattern

I have this fabric from curtains that I made and am no longer using. I thought it would make a beautiful tree skirt.

fabric

Since I had a long panel, I folded it in half and then in half again so it is folded into fours.

folded in half and half again

Next is time to measure. I divided the diameter in 4 because I folded it so it needs to be 3 inches from the point. I did the semi-circle by just measuring out 3 inches from the point in different spots on the fabric.

measure with a fabric marker

I did the same thing with the outer measurement but went with 22.5 inches instead of the 16 inches I originally wrote down on my professional pattern. The I cut along the lines I drew.

cut the along the lines

a few steps left

This is what is looks like unfolded and of course Rusty needed to help me out.

Next I cut a line down the fabric.

cut down to be able to wrap around the tree

The last, and time-consuming thing to do is finish it to hide the raw edges. This can be done in three ways.

1. folding edge over and folding it again and hem to encase the raw edge
2. add binding to the edges to encase the raw edge
3. zigzag stitch around the edge to prevent fraying and then folding over and sew a hem

Although the first two options are probably the better options, I went with the zig zag stitch and press seam and sew a hem because the first two requires more time at the ironing board and pinning. I hate ironing so I went with the zig zag stitch.

all finished!